FRONT WING CARVE 3.0 D/LAB
PERFORMANCE SURF / FREESTYLE / PRONE / KITE
Duotone - Front Wing Carve 3.0 D/LAB
Duotone Carve 3.0 D/LAB; Surf, Freestyle, Prone ve Kite Foil performansını bir araya getiren yüksek performanslı front wing serisidir. Carve 2.0 D/LAB'a göre geliştirilmiş pump ve glide karakteri daha hızlı ivmelenme ve uzun uçuş sağlarken, dalgada ekstra drive ve hız sunar. Akıcı rail-to-rail tepkisi sıkı dönüşleri ve hassas carving kontrolünü destekler.
Geliştirilmiş pitch stabilitesi yüksek hızlarda kontrolü artırırken güçlü pop freestyle manevralarını destekler. Her boyuta özel profil ve curvature, HM Carbon layup ve minimum görünür vida tasarımı düşük drag ile yüksek tepki sağlar. 500, 650, 800, 950 ve 1100 cm² seçenekleri farklı sürüş hedeflerine uyarlanmıştır.
Öne Çıkan Özellikler
- Çeviklik: Akıcı rail-to-rail tepkileri keskin ve hassas carving dönüşleri destekler.
- Stabilite: Geliştirilmiş pitch stabilitesi yüksek hızlarda daha kontrollü ve öngörülebilir sürüş sağlar.
- Versatility: Surf, Freestyle, Prone ve Kite Foil disiplinlerine uyum sağlayan geniş performans alanı.
- Pop: Güçlü pop karakteri freestyle ve aerial manevraları destekler.
- Pump & Glide: Önceki Carve 2.0 D/LAB'a göre geliştirilmiş pumping ve glide verimliliği.
- Efficiency: Screw-on SLS konseptine göre daha düşük drag ile artan hız ve verimlilik.
- Fine Tuned: Her boyut lift, hız ve manevra kabiliyeti arasında kendi kullanım hedefine göre dengelenmiştir.
- Geniş Uyumluluk: D/LAB tail seçenekleri ve 3BS mast bağlantılarıyla çok yönlü setup imkânı sunar.
Öne Çıkan Özellikler
- Çeviklik: Akıcı rail-to-rail tepkileri keskin ve hassas carving dönüşleri destekler.
- Stabilite: Geliştirilmiş pitch stabilitesi yüksek hızlarda daha kontrollü ve öngörülebilir sürüş sağlar.
- Versatility: Surf, Freestyle, Prone ve Kite Foil disiplinlerine uyum sağlayan geniş performans alanı.
- Pop: Güçlü pop karakteri freestyle ve aerial manevraları destekler.
- Pump & Glide: Önceki Carve 2.0 D/LAB'a göre geliştirilmiş pumping ve glide verimliliği.
- Efficiency: Screw-on SLS konseptine göre daha düşük drag ile artan hız ve verimlilik.
- Fine Tuned: Her boyut lift, hız ve manevra kabiliyeti arasında kendi kullanım hedefine göre dengelenmiştir.
- Geniş Uyumluluk: D/LAB tail seçenekleri ve 3BS mast bağlantılarıyla çok yönlü setup imkânı sunar.
Duotone - Front Wing Carve 3.0 D/LAB
The Duotone Carve 3.0 D/LAB is a high-performance front wing range developed for Surf, Freestyle, Prone and Kite Foiling. Improved pump and glide compared with the Carve 2.0 D/LAB provide effortless acceleration and sustained flight, while added drive and speed on waves enhance carving performance. Fluid rail-to-rail reactions allow tight turns with precise and confident control.
Improved pitch stability adds control at high speed, while strong pop supports freestyle and aerial maneuvers. Size-specific profiles and curvatures, HM Carbon construction and a minimal-drag connection design maximize responsiveness and efficiency. Five sizes—500, 650, 800, 950 and 1100 cm²—cover a broad range of rider weights and performance targets.
Highlights
- Agility: Fluid rail-to-rail reactions enable tight, precise carving turns.
- Stability: Improved pitch stability enhances control and predictability at higher speeds.
- Versatility: Designed across Surf, Freestyle, Prone and Kite Foiling disciplines.
- Pop: Strong pop characteristics support freestyle and aerial maneuvers.
- Pump & Glide: Improved pumping and glide efficiency compared with the previous Carve 2.0 D/LAB.
- Efficiency: Lower drag than the screw-on SLS concept increases speed and overall performance.
- Fine Tuned: Each size balances lift, speed and maneuverability for its specific target use.
- Compatibility: Compatible with D/LAB tail options and Duotone masts using the 3BS connection.
Highlights
- Agility: Fluid rail-to-rail reactions enable tight, precise carving turns.
- Stability: Improved pitch stability enhances control and predictability at higher speeds.
- Versatility: Designed across Surf, Freestyle, Prone and Kite Foiling disciplines.
- Pop: Strong pop characteristics support freestyle and aerial maneuvers.
- Pump & Glide: Improved pumping and glide efficiency compared with the previous Carve 2.0 D/LAB.
- Efficiency: Lower drag than the screw-on SLS concept increases speed and overall performance.
- Fine Tuned: Each size balances lift, speed and maneuverability for its specific target use.
- Compatibility: Compatible with D/LAB tail options and Duotone masts using the 3BS connection.