BACK WING STABILIZER R
FREERACE PERFORMANCE
Duotone - Back Wing Stabilizer R
Duotone Back Wing Stabilizer R, Blitz 550 ve 800 front wing modelleriyle yüksek hızlı freerace foil sürüşü için geliştirilmiştir. R190 profilindeki dikey winglet'ler yüksek hızda yaw stabilitesini desteklerken düşük sürüklenmeli profil güçlü pitch kontrolü sağlar. Böylece hız yükseldikçe daha dengeli, kontrollü ve güven veren bir foil karakteri elde edilir.
190 cm² yüzey alanına sahip R190, 2x M6x16 vida ile monte edilir ve önerilen sıkma torku 10 Nm'dir. Deneyimli sürücüler 0.3 veya 0.6 derece negatif shim kullanarak stabilizer hücum açısını azaltabilir ve özellikle 47 cm tail ve dördüncü vida kombinasyonunda drag seviyesini daha da düşürebilir.
Öne Çıkan Özellikler
- Freerace Performansı: Yüksek hızda kontrol ve stabilite önceliğiyle geliştirilmiştir.
- Blitz Uyumluluğu: Blitz 550 ve Blitz 800 front wing modelleriyle eşleşmek üzere tasarlanmıştır.
- Dikey Winglet'ler: Wing tiplerindeki dikey kanatçıklar yüksek hızda yaw stabilitesini artırır.
- Düşük Drag Profili: Hızı korurken sürüklenmeyi azaltmayı hedefleyen profil kullanır.
- Pitch Stabilitesi: Yüksek hızlarda güçlü pitch kontrolü ve dengeli sürüş hissi sağlar.
- Shim Ayarı: 0.3 ve 0.6 derece negatif shim seçenekleri ile hücum açısı ve drag seviyesi ince ayarlanabilir.
- R190 Boyutu: 190 cm² yüzey alanı ile performans odaklı freerace kullanımı için optimize edilmiştir.
- Montaj: 2x M6x16 vida ve 10 Nm önerilen sıkma torku kullanır.
Öne Çıkan Özellikler
- Freerace Performansı: Yüksek hızda kontrol ve stabilite önceliğiyle geliştirilmiştir.
- Blitz Uyumluluğu: Blitz 550 ve Blitz 800 front wing modelleriyle eşleşmek üzere tasarlanmıştır.
- Dikey Winglet'ler: Wing tiplerindeki dikey kanatçıklar yüksek hızda yaw stabilitesini artırır.
- Düşük Drag Profili: Hızı korurken sürüklenmeyi azaltmayı hedefleyen profil kullanır.
- Pitch Stabilitesi: Yüksek hızlarda güçlü pitch kontrolü ve dengeli sürüş hissi sağlar.
- Shim Ayarı: 0.3 ve 0.6 derece negatif shim seçenekleri ile hücum açısı ve drag seviyesi ince ayarlanabilir.
- R190 Boyutu: 190 cm² yüzey alanı ile performans odaklı freerace kullanımı için optimize edilmiştir.
- Montaj: 2x M6x16 vida ve 10 Nm önerilen sıkma torku kullanır.
Duotone - Back Wing Stabilizer R
The Duotone Back Wing Stabilizer R is developed for high-speed freerace foiling and designed to pair with the Blitz 550 and 800 front wings. Vertical winglets at the tips improve yaw stability as speed increases, while the selected low-drag profile delivers strong pitch stability. The result is a controlled and confidence-inspiring foil feel at higher speeds.
The R190 has a 190 cm² surface area, mounts with 2x M6x16 screws and uses a recommended torque of 10 Nm. Experienced riders can use negative 0.3 or 0.6 degree shims to reduce stabilizer angle of attack and further minimize drag, particularly when combined with the 47 cm tail and fourth screw.
Highlights
- Freerace Performance: Developed for speed-focused riding with control and stability.
- Blitz Compatibility: Designed to pair with the Blitz 550 and Blitz 800 front wings.
- Vertical Winglets: Wingtip winglets help stabilize yaw at higher speeds.
- Low-Drag Profile: Selected to reduce resistance while maintaining efficient speed.
- Pitch Stability: Provides strong pitch control during high-speed foil riding.
- Shim Tuning: Negative 0.3 and 0.6 degree shims allow fine adjustment of angle of attack and drag.
- R190 Size: 190 cm² surface area optimized for freerace-oriented performance.
- Mounting: Uses 2x M6x16 screws with a recommended torque of 10 Nm.
Highlights
- Freerace Performance: Developed for speed-focused riding with control and stability.
- Blitz Compatibility: Designed to pair with the Blitz 550 and Blitz 800 front wings.
- Vertical Winglets: Wingtip winglets help stabilize yaw at higher speeds.
- Low-Drag Profile: Selected to reduce resistance while maintaining efficient speed.
- Pitch Stability: Provides strong pitch control during high-speed foil riding.
- Shim Tuning: Negative 0.3 and 0.6 degree shims allow fine adjustment of angle of attack and drag.
- R190 Size: 190 cm² surface area optimized for freerace-oriented performance.
- Mounting: Uses 2x M6x16 screws with a recommended torque of 10 Nm.